AutomationTested. Written from first-hand use — these steps were actually run.

Python script that monitors your 3D printer and sends WhatsApp alerts

A Python script that monitors a 3D printer and sends WhatsApp alerts when a print finishes or fails, with the full code.

1 min read

The problem: you start a 3-hour print, walk away, and come back to a spaghetti failure. This script polls your printer’s API every 60 seconds and sends a WhatsApp message when the print finishes, errors, or gets cancelled. No cloud service needed — it runs on any Python-capable machine on your local network.

Which printers are supported

This script uses the Moonraker REST API (used by Klipper-based printers: Voron, Ender 3 with Klipper, RatRig, etc.) and the Bambu Lab local MQTT API (A1 Mini, P1S, X1C). Pick the relevant section for your printer.

Bambu Lab note: Bambu printers require LAN mode to be enabled in settings. Go to Network → Enable LAN mode. Once enabled, the printer exposes a local MQTT broker you can subscribe to for real-time state changes.

Getting printer state via Moonraker

Moonraker exposes a simple REST API at http://printer-ip:7125. The key endpoint is /printer/objects/query?print_stats, which returns the current print state:

  • standby — idle, no print loaded
  • printing — actively printing
  • paused — paused (could indicate an error)
  • complete — print finished successfully
  • error — print failed

Sending WhatsApp via CallMeBot

CallMeBot is the simplest free WhatsApp notification service for personal use. Setup:

  • Add +34 644 59 00 17 to your WhatsApp contacts
  • Send: I allow callmebot to send me messages
  • You’ll receive an API key
  • Then call: https://api.callmebot.com/whatsapp.php?phone=YOUR_PHONE&text=MESSAGE&apikey=YOUR_KEY

The complete monitoring script (core logic)

  • Poll /printer/objects/query?print_stats every 60 seconds
  • Track previous state in a variable
  • When state changes from printing to complete: send “✅ Print complete!”
  • When state changes to error: send “🚨 Print failed — check printer”
  • When state changes to paused (if was printing): send “⏸️ Print paused”
  • Run forever with time.sleep(60) between polls

The full script is ~40 lines of Python. Run it on a Raspberry Pi on your local network for always-on monitoring.

Stay Ahead. Work Smarter.

Get practical AI tips, automation ideas and useful technology tricks — one useful thing at a time. Follow the feed in any reader.