Complete 3D printing starter guide — everything I wish I knew
A complete 3D printing starter guide: choosing a printer, understanding filament, learning the slicer, your first prints, and fixing failures.
When I started 3D printing I wasted two weeks on the wrong information — forum posts from 2019, YouTube videos for printers I didn’t own, and advice that assumed I already knew what I was doing. This guide is what I wish had existed.
Step 1 — Pick the right printer
For 99% of beginners, the choice comes down to three printers:
- Bambu Lab A1 Mini (₹28k) — best out-of-box experience, almost no setup. My recommendation if budget allows.
- Creality Ender 3 V3 SE (₹12k) — budget option, requires more tinkering, great for learning how the machine works.
- Bambu Lab P1S (₹65k) — enclosed, handles more materials, for serious makers.
Don’t buy a resin printer as your first machine. The workflow is more complex and the post-processing involves chemicals. Start with FDM (filament).
Step 2 — Understand filament
You’ll mostly use two materials to start:
- PLA — easiest to print, works great for most things, not heat resistant. Start here.
- PETG — stronger, slightly heat resistant, a little trickier. Use for functional parts.
Avoid ABS, ASA, and Nylon until you have 50+ hours of printing experience. They require enclosures and careful dialling-in.
Step 3 — Learn the slicer
A slicer converts your 3D model into print instructions. The main ones are Bambu Studio (if you have a Bambu printer), Orca Slicer (free, works with any printer), and Cura (popular, lots of community presets).
The most important settings to understand early:
- Layer height — 0.2 mm is the standard. Lower = smoother but slower. Start at 0.2 mm.
- Infill percentage — how solid the inside is. 15% for decorative, 25–40% for functional parts.
- Supports — auto-generated structures for overhangs. Enable only when needed.
- Bed adhesion — brim or raft to stop corners lifting. Use a 5 mm brim on large flat parts.
Step 4 — Your first 5 prints
- Benchy — the classic test boat. Everyone starts here. Tells you if your settings are dialled in.
- Calibration cube — 20×20×20 mm cube. Check dimensions with calipers.
- Phone stand — practical, tests overhangs, something you’ll actually use.
- Cable clip — small, fast, immediately useful on your desk.
- Something you designed — even a simple box. Fusion 360 has a free version. Start simple.
Where to find free models: Printables.com (best for quality), Thingiverse (largest library), MakerWorld (Bambu’s platform, good curation).
Step 5 — When things go wrong
Every printer fails eventually. The most common issues and quick fixes:
- First layer not sticking → re-level the bed, clean with IPA, increase bed temp by 5°C
- Stringing → increase retraction, reduce travel temperature, increase travel speed
- Layer shifting → reduce print speed, check belt tension
- Under-extrusion → increase flow rate, check for partial clog, increase temp by 5°C
The Printables troubleshooting guide and the Bambu Lab Wiki are both excellent resources once you know what symptom you’re dealing with.
Stay Ahead. Work Smarter.
Get practical AI tips, automation ideas and useful technology tricks — one useful thing at a time. Follow the feed in any reader.